MOTCO Wetlands Channel Plug
A 10ft tall, 40ft long Double Closed End AquaDam was installed in a low-flow channel that ran through some tidal wetlands. While a typical installation would have installed the dam from bank to bank, the channel was narrow enough that we were able to use the width of the AquaDam to seal against the bottom and sides of the channel, instead of using the AquaDams length. This job was at Port Chicago, in the MOTCO Wetlands. All AquaDams, equipment, and people were helicoptered to the job site, in order to minimize disturbance to the environment. AquaDam was installed in 4 hours, from first flying in to flying out. ...
West Sacramento – Meyers Bridge with Sacramento, CA 2013
Three 16ft Tall 33ft Wide (full) 300ft Long Single Closed End (SCE) AquaDams, Barge Canal, McGowan Memorial Bridge Construction, Staggered Configuration, Replacement AquaDam, Tidal Influenced Water ...
Bypass Pipes beneath AquaDams, Seattle WA 2010
8ft tall Main, 5ft tall Support, and Two 3ft tall Under-Pipe Single Closed End (SCE) AquaDams, Stream Diversion, Bank Stabilization, Four 24-inch Diameter by 600ft Long Flume Pipes ...