Plan view with work site from Google Earth Pro. The AquaDam for this project was installed inside the yellow shape.

Job site prior to installation of the AquaDams. Two of four.

Job site prior to installation of the AquaDams. Three of four.

Job site prior to installation of the AquaDams. Four of four.

Aerial image showing the path of where the AquaDams were placed (in red) to help restrain the effluent in the wastewater pond.

1.5ft tall double closed end (DCE) Starter AquaDam being filled using the wastewater on site.

Pumping both fill tubes of the DCE AquaDam with two connection collars.

AquaDams fill tube secured but leaning over and allowing water to spill out.

The fill tube on the AquaDam have been reinforced and elevated to keep the water inside secured.

SCE AquaDam at the end with a connection collar.

SCE AquaDam filling using two (2) 3” Honda WB30XT water pumps.

Top view of the two AquaDams connected with a connection collar and the second AquaDam filling.

End of SCE AquaDam with connection collar ready for the next AquaDam, if extra length is needed.

The AquaDam can be tied to anchor points to help keep the unit from rolling/sliding on cross slopes.

AquaDams can be tied back at multiple points to keep from rolling on a cross slope.

Four photos of AquaDams installed around the pond. One of four.

Four photos of AquaDams installed around the pond. Two of four.

Four photos of AquaDams installed around the pond. Three of four.

Four photos of AquaDams installed around the pond. Four of four.