Lake Independence, California 2012
15' deep Intake Channel Isolation

Click on photos to view a larger version
A boom truck was used to set the 21' tall AquaDam into the water. Lake Independence, California 2012
Lake Independence, California 2012
Lake Independence, California 2012
Lake Independence, California 2012
AquaDams float in water; this AquaDam was towed into place using a 15hp outboard motorboat. Lake Independence, California 2012
Secondary containment surrounding any potential contaminants was very important. A few large boulders were removed to create "low spots", and the area was covered in watertight poly sheeting. Lake Independence, California 2012
The 3" pumps were placed in secondary containment. There was some incidental water discharge from the pumps into secondary containment, which was removed into temporary holding containers, which were removed daily. Lake Independence, California 2012
Dunnage material was laid down at the start point of the primary AquaDam. The primary AquaDam was then unrolled into the water. Lake Independence, California 2012
Blue discharge hoses extend into the dual water chambers of the AquaDam, causing it to fill and unroll, slowly. Lake Independence, California 2012
Pages: 1 2 3 4 5 6 7 8 Videos